JetHome JetHub E1 DIN Rail Controller

The range of JetHome devices has been replenished: JetHome E1 has appeared on sale.

The microcontroller is a complete device based on ESP32 with pre-installed ESPHome firmware. If you wish, you can re-upload the firmware yourself: for this purpose, there is a microUSB console port on the front panel of the controller.


✅ Relay 16A - 5 pcs.
In "Dry contact" input - 6 pcs.
✅ Ethernet: Ethernet 10/100
✅ Wi-Fi: 2.4Ghz
✅ POE in: Passive PoE
✅ Enclosure Type: DIN Rail
✅ Compatible Ecosystems: Arduino, ESPHome, PlatformIO