Using Zigbee JetHome Devices with Zigbee2MQTT

Erasing NVMEM(NVRAM) with Zigbee2MQTT

  1. Stop Zigbee2MQTT
  2. In the directory where Zigbee2MQTT is installed, run:
node scripts/zStackEraseAllNvMem.js / dev/ttyUSBxxxx # Change to your USB port, usually /dev/ttyUSB0 for a stick or /dev/ttyAML2 for controllers

Migration between different 2538/2652 Zigbee2MQTT adapters

  1. Restarting Zigbee2MQTT
  2. Waiting for 5 minutes for the whole network to work.
  3. Stopping Zigbee2MQTT
  4. Insert a fresh stick ( required with NVMEM reset)
  5. Start Zigbee2MQTT, wait a few minutes, look at the logs (usually recovery can take up to 5 minutes, depending on the number of devices).
  6. < li>99% of devices should work