How to use Zigbee Home Automation (ZHA) for Home Assistant

All JetHome controllers and sticks are supported in the Zigbee Home Automation system.

You need to add a new Home Assistant integration to connect. Check that the zigbee adapter is not busy with another process (zigbee2mqtt, for example).

1.jpg

Device type must be selected ZNP Texas Instruments Z-Stack

< figure>3.1.jpg
4.jpg

In the connection settings, you need to Correctly specify the port where the adapter is located. For JetHub D1 and H1 controllers, the port for the embedded adapter must be /dev/ttyAML2. Connection speed 115200, leave flow control unchecked.

If the settings are correct, the connection will succeed.

6. jpg