Software for modules based on the TI CC2538 chip
Important: Third party firmware may not be compatible or supported by JetHome devices. Therefore, JetHome devices are not guaranteed to work with third-party firmware. Use only recommended firmware below.
To work with Zigbee protocol for JetHome modules based on CC2538+CC2592 chip, it is recommended to use the following firmware:
- Firmware for working as a Zigbee coordinator: https://github.com/jethome-ru/zigbee-firmware/tree/master/ti/coordinator/cc2538_cc2592 (When connecting the module via UART, the ZNP_UART firmware version is required, when connected via USB - ZNP_USB The latest stable firmware is 20201010 at the time of writing).