Zigbee USB Stick CC2652P1 - JetHome JetStick Z2

The JetStick Z2 stick is designed to work as a Zigbee coordinator or router and can be used to control other wireless devices in the home infrastructure operating on the Zigbee protocol as part of a Smart Home controller with the appropriate software installed and configured.

The device is based on a modern Texas Instruments CC2652P1 multi -protocol wireless microcontroller for the 2.4 GHz band and features high performance, increased transmitter output power and compact size.

Full documentation is available on the wiki

Main characteristics

• 48MHz Arm® Cortex®-M4F processor.
• flash memory 352KB.
• ROM 256KB for library functions.
• SRAM 80KB.
• transmitter output power up to +20 dBm.
• supply voltage 5V from the USB port.
• current consumption in active mode is not more than 100 mA.
• antenna connector - RP-SMA.

Software

• Zigbee2MQTT
• Home Assistant Zigbee Home Automation
• The device works on the Z-Stack protocol from Texas Instruments, and can be used with any other software that supports this protocol.
• The device comes pre-installed with public firmware or based on non. The manufacturer is not responsible for possible incorrect operation of this software .

Dimensions and weight

• Overall dimensions of the stick in the case without an external antenna: 62 x 18 x 10 mm.

Operating mode

• Ambient temperature: 0..+40 С.
• Relative air humidity up to 80% without moisture condensation.
• Closed rooms without aggressive vapors and gases.