News
Many of you are wondering how JetHome products are designed and assembled. Today we decided to share with you a clear example of how this happens. Below you will see some photos of the assembly process of the JetHome JetHub D1+ controllers.
At the beginning of the process, we carefully prepare all the necessary components to make sure that we can produce high quality products. We then begin assembly following the instructions and procedures we have developed over many years of experience.
We take pride in the fact that every JetHome product undergoes rigorous quality control throughout all stages of production to ensure it will perform flawlessly for years to come.
We hope that these photos will give you a better understanding of how we make our products and that we are working hard to make them the best.
JetHome Flower Sensor
JetHome Flower Sensor is an updated version of JetHome's EFR32MG22 Soil Moisture Sensor An updated version of the Soil Moisture Sensor is coming soon. The advantage of this version is the new Zigbee chip EFR32MG22, now from Silicon Labs. Let's forget the previous version as a battery shredder. The device has become more compact, it will hardly be...
Installing BARY: SMARTHOME on the JetHome JetHub D1 smart home gateway
BARY: SMARTHOME software developers ported their software to JetHome JetHub D1 controllers D1. This is what they write on their blog: "Hello friends! BARY now supports the very cool JetHome JetHub D1 smart home gateway, we want to talk about its capabilities." All the details are available in the documentation: docs.bary.io/news/2021...
Installing IntraHouse on JetHub controllers
The guys from IntraHouse ported their software to the JetHome JetHub D1 and JetHub H1. This is what they write: "We wrote a plug-in for interacting with I / O, 1-wire and ZigBee. It works great, we really liked the work done." Also on the IntraHouse blog you will find an article on installing the system on our controller .
JetHome JetHub H1 review by Alex Kvazis
JetHome JetHub H1 controller smart home, Supervised Home Assistant installation, zigbee2mqtt setup The video is dedicated to the JetHome JetHub H1 smart home controller - an all-in-one device, essentially a ready-made server with an integrated Zigbee module, on which you can deploy a full-fledged smart home control system. Step by step...
Smart Thermostat with auto Heat/Cool mode and PID control support (Home Assistant component)
Fixed smart_thermostat for Home Assistant, replacing generic and dualmode_generic dual mode support, PID controller support and much more. While in BETA, I'm testing it myself. A separate discussion group: t.me/ha_smart_thermost... GitHub: github.com/jethome-en/...
Welcome to JetHome Community!
On behalf of the JetHome team, we now have a comfortable place to discuss any issue related to JetHome devices ! You will be able to: Chat with other users in community ; Get advice from the creators of JetHome at support for JetHome devices . community.jethome.ru/
New addon version 0.1.2
B BETA -repositories new addon version 0.1.2 is available FIX: Incorrect display of relay and LED status on addon restart. github.com/jethome-ru/... We are testing, if everything is ok, we will release it in a few days. PS . Of course also available in the EDGE repositories
JetHub D1 - addon for Home Assistant
Tested and now stable! The addon is designed to control the built-in relays, LEDs, and read the state of discrete inputs of the JetHub D1 controller out of the box. Install and use!
JetHub D1 - Addon for Home Assistant for relay and input forwarding
Still in the EDGE stage (something might break) IMPORTANT: * In the version of 10/07/2021, the names of entities in the mqtt-io config have been corrected. This affects the unique-id. As a consequence, there will be a duplication of old and new entities. To fix the problem: * Stop aadon * Stop mqtt server * Restart HA * Delete all JetHub entities in...
JetHub D1 - Addon for Home Assistant for relay and input forwarding
Still in the EDGE stage, but you can already use it. A test build is installed from the repository. Superviser -> Store -> Repositories -> Add github. com/jethome-en/... Report issues on github or in chat .