News

Many of you are wondering how JetHome products are designed and assembled. Today we decided to share with you a clear example of how this happens. Below you will see some photos of the assembly process of the JetHome JetHub D1+ controllers.

At the beginning of the process, we carefully prepare all the necessary components to make sure that we can produce high quality products. We then begin assembly following the instructions and procedures we have developed over many years of experience.

We take pride in the fact that every JetHome product undergoes rigorous quality control throughout all stages of production to ensure it will perform flawlessly for years to come.

We hope that these photos will give you a better understanding of how we make our products and that we are working hard to make them the best.

18.03.2024

Video review of the Three-channel battery-powered digital input module (Zigbee) - JetHome WS7!

#66] The best companion for smart lamps on Zigbee 3.0 – JetHome WS7 Video: Watch here Smart lamps cannot be de-energized - I speak this mantra from video within video. This is important because as soon as you turn off the power to a smart lamp, it immediately becomes stupid and cannot be turned on either by automation or by voice. Just power it...

12.02.2024

New video review on Pavel's channel!

" Smart home controller on DIN rail with Zigbee, 1wire, RS485, dry contacts JetHome JetHub D1+ "! Video: Watch here In this video we looked at the JetHub D1+ smart home controller. Installed Home Assistant, Zigbee2mqtt. We worked with the built-in relay load. The condition of dry contacts was monitored. We connected the ds18b20 temperature...

28.11.2023

ATTENTION! A new era of JetHome JetHub D1+ controllers is on the horizon!

We are pleased to announce the launch of sales of an updated version of our popular controller JetHome JetHub D1+ Main changes: - Galvanic isolation of RS485 ports and digital inputs: the system is now even more reliable and safe. We take into account your needs and try to implement them. - Zigbee module on the EFR32MG21 microcontroller. -...

03.10.2023

Home Assistant Supervised

In test mode, we prepared Armbian firmware with pre-installed Home Assistant Supervised. Assemblies for firmware using Amlogic Burning Tools are posted daily at the address codenamed "Armbian with HA Supervised": fw.jethome.ru What is included in the Home Assistant Supervised assembly: ✅ The current version of Home Assistant at the time of assembly. ✅...

22.09.2023

Armbian 23.08

- Linux Kernel version 6.1.53. The new version of the Linux kernel provides even higher performance and system stability. - Updated JetHub device support packages. We are always working to improve support for JetHub devices to make your experience as comfortable as possible. - Added links to RS485 ports. You can now easily access RS485 ports at...

21.09.2023

Addon jethub-mqtt-io JetHub D1/ D1+ version 0.3

Great news for JetHub D1/D1+ users. Home Assistant addon has been updated to version 0.3 . - Added support for Linux Kernel 6.2 and higher. You can now enjoy all the benefits of the latest Linux kernels on JetHub D1/D1+. - Fixed publication of the peripheral state when the device starts. We have resolved this issue and devices will now more reliably...

10.08.2023

Invitation to Sprut.Party 2023!

Dear friends! We are pleased to invite you to the event - "Sprut.Party 2023", where we will take an active part! An event in the field of smart home, where you can see live these “strange people” who are passionate about this still incomprehensible thing called “Smart Home”. This is a community of friends who are united by a common interest,...

19.04.2023

insider

At the moment, we are actively working on expanding the JetHome product line. At the booth we presented the first prototypes of the new JXD line. The iron component and the periphery will be very diverse. We are sure that the new products will definitely please you. And those who want to be the first to get acquainted with the new line of devices, we...

19.04.2023

A few photos of the booth at HI-TECH BUILDING 2023

Don't miss the opportunity to attend this unique event and learn about the latest technological developments in building automation and smart home systems. We are sure that you will be delighted with the innovative solutions and the latest technologies presented at the exhibition. All the details here - Our stand №126, Loft Hall #2 -...

18.04.2023

JetHome- Device Firmwares

We continue to delight you with updates! We recently updated the documentation section, and now the next step is the downloads page . To ensure the convenience of users, we have completely redesigned the controller firmware download page. The new page design is more intuitive: each firmware is in its place, which allows users to quickly and...

Show another 10 pages