DIN Rail Automation Controller - JetHome JetHub D1

D1-1Gb-32Gb-2652
8 900.00 
Out of stock
BrandJetHome Embedded module 1Zigbee CC2652P1 Device typeLinux controller ChipsetAmlogic A113x Case typeDIN-rail RAM1 GB FlasheMMC 32 GB Power typeDC 9v~56v (terminal connector) Ecosystem compatibilityHome Assistant (Z2M), Home Assistant (ZHA), ZIgbee2MQTT Supported OSArmbian Linux USBUSB 2.0 EthernetEthernet 10/100 Wi-FiWi-Fi dual band 2.4/5Ghz Bluetoothyes Relay 5A3 Discrete input4 RS4852 1-Wire1

Discontinued. Recommended replacement - JetHome JetHub D1+

Linux controller is designed to build automation systems and monitoring: interrogation of sensors, use as a collection device and data transmission, performing PLC functions in smart home systems, direct load control.

JetHub D1 can be used as a central controller in a "smart home" together with wireless (Wi-Fi, ZigBee) and wired (RS-485) devices from other manufacturers.

Replacing the "constructor" in the form of Raspbery PI + external devices.

Most of the interfaces required by the user are available out of the box.

The controller case is made with the possibility of mounting on a DIN rail and allows you to conveniently place the controller in the electrical panel at home.

Main characteristics

  • Amlogic A113X (ARM Cortex-A53) quad-core processor at operating frequency up to 1 GHz.
  • Dual-band Wi-Fi + Bluetooth
  • Ethernet 100Mbit/s.
  • Zigbee 3.0 wireless module (optional)
  • 2 RS485 interfaces compatible with modbus protocol.
  • 3 relays 5A.
  • 4 dry contact inputs.
  • 1-Wire interface.
  • USB type B connector for connecting devices.
  • The controller is powered by an external power supply 9-60v, (in not included), or via "Passive POE" technology via the Ethernet connector.

Documentation

Peculiarities

  • When connecting different power sources at the same time, it will consume from the one with the higher voltage. If one source is disabled, work will continue from the second one.

Software

  • The controller comes preinstalled with the Armbian Linux operating system.
  • Low model and mid model (512Mb RAM, 1Gb / 8Gb eMMC) are fine to install Zigbee2MQTT remotely or Home Assistant in venv.
  • HassOS or Home can be installed on the older model (1Gb RAM, 16Gb eMMC) Assistant supervised with addon system support.
  • You can install any other automation software on the controller that works on Linux: ioBroker, openHAB, Domoticz, MajorDomo and more.
  • Documentation for installing software and using controllers is available to docs.jethome.ru

Dimensions and weight

  • Dimensions: 130 x 75 x 57 mm
  • Weight: 180 g
  • Din-rail mounting option

Operating mode

  • Operating temperature: 0..+40 C.

Restrictions

  • To use the device, you need to have basic knowledge of Linux (ping, ssh, systemctl, ..)
  • The device is not designed for video processing. Video processing can lead to increased load on processor, overheating and breakage.
  • Due to the peculiarities of the software implementation of 1 Wire in Linux, the maximum number of device sensors on one bus is 5pcs.
Brand
JetHome
Device type
Linux controller
Chipset
Amlogic A113x
Case type
DIN-rail
RAM
1 GB
Flash
eMMC 32 GB
Power type
DC 9v~56v (terminal connector)
Ecosystem compatibility
  • Home Assistant (Z2M)
  • Home Assistant (ZHA)
  • ZIgbee2MQTT
Supported OS
  • Armbian Linux
Платы и модули
Embedded module 1
Zigbee CC2652P1
Interfaces
USB
USB 2.0
Ethernet
Ethernet 10/100
Wi-Fi
Wi-Fi dual band 2.4/5Ghz
Bluetooth
yes
Peripheral
Relay 5A
3
Discrete input
4
RS485
2
1-Wire
1
Find similar

No reviews found

Terms of use and restrictions
  • By purchasing this product, you agree to the terms technical support.
  • The equipment was tested only with automation systems listed in the column "Compatible ecosystems" on the product tab "Features" . Work with other systems is not guaranteed and is not a reason to return the product.
  • Equipment is intended for indoor use only, unless otherwise stated on the "Features" tab of the product.
  • All devices presented on the site are not designed to work in life support systems and can only be used as auxiliary devices.

  • Most Popular
  • Third party devices