Three Channel Battery Powered Digital Input Module (Zigbee) - JetHome WS7
Please sign in so that we can notify you about a reply
The device is designed to connect up to 3 sensors with outputs “dry contact”, for example, switches, leakage sensors, reed switches, etc.
The device allows you to turn a regular wall switch with a quantity keys from 1 to 3 in a “smart” switch operating using the Zigbee protocol. The compact dimensions of the device allow it to be placed in an installation box along with the switch.
Main characteristics
- Modern microcontroller with low power consumption TI CC2652R1.
- Supports Zigbee 3.0 protocol.
- Support for OTA updates.
- 3 “dry contact” inputs for connecting sensors (switch keys).
- Customizable input operating modes: with and without latching contacts contacts.
- Length of leads for connecting contacts: 100 mm.
- Low power consumption in sleep mode.
- Powered by a single CR2477 element.
Documentation
Dimensions and weight
- Overall dimensions of the case: 42 x 41 x 15 mm.
- Weight with battery 30 g
Operation mode
- Ambient temperature: - 20..+60 C.
- Relative air humidity up to 70% without condensation.
- Enclosed explosion-proof rooms without aggressive vapors and gases.
Restrictions
- Direct Zigbee binding is available from version 9 of the module firmware.
Brand
JetHome
Device type
Discrette input module
Power type
1 x CR2477
Ecosystem compatibility
- Home Assistant (Z2M)
- Home Assistant (ZHA)
- Sprut HUB
- SLS HUB
- ZIgbee2MQTT
Interfaces
Zigbee
Zigbee 3.0
No reviews found