Zigbee USB stick EFR32MG21 - JetHome JetStick Z4
Please sign in so that we can notify you about a reply
The JetStick Z4 stick is designed to work as a coordinator or router Zigbee and can be used to control other wireless home infrastructure devices operating on the Zigbee protocol, in as part of the Smart Home controller with installed and configured appropriate software.
The device is based on a modern multi-protocol wireless microcontroller for the 2.4 GHz range Silicon Labs EFR32MG21 and is characterized by high performance, increased output power transmitter and compact dimensions.
Main characteristics
- 80MHz Arm® Cortex®-M33 processor.
- Flash memory 1024KB.
- SRAM 96KB.
- Transmitter output power up to + 20 dBm.
- Supply voltage 5V from USB port.
- Current consumption in active mode is no more than 150 mA.
- antenna connector - RP-SMA.
Documentation
Software
- Home Assistant Zigbee Home Automation
- Zigbee2MQTT - support status - beta, use at your own risk.
- The device operates according to the protocol EZSP from Silicon Labs, and can be used with any other software that supports this protocol.
- The stick comes with a pre-installed bootloader and coordinator firmware, based on the original firmware from Silicon Labs EZSP Coordinator v8. Factory firmware serial port settings: speed 115200 Bit/sec, software flow control Xon/Xoff.
Dimensions and weight
- Overall dimensions of the stick in the case without an external antenna: 62 x 18 x 10 mm.
Operating mode
- Ambient temperature: 0..+40 C.
- Relative air humidity up to 80% without moisture condensation.
- Closed spaces without aggressive vapors and gases.
Restrictions
- The device is substituted and supported only with the coordinator firmware.
- The user, at his own responsibility, can use third-party firmware, including router firmware.
Brand
JetHome
Цвет
Black
Device type
USB stick
Power type
DC 5v USB-A
Ecosystem compatibility
- Home Assistant (Z2M)
- Home Assistant (ZHA)
- ZIgbee2MQTT
Interfaces
USB
USB 2.0
Zigbee
Zigbee 3.0
No reviews found